After I got it home I could see that it was held in by a little pin which had fallen out from all the vibrations I guess. So I ordered a replacement switch on eBay, put it in and put the dash back together and all worked fine.
But afterwards as I was looking at the old switch I found that the little pin that had fallen out was lodged in another part of the hinge. I was able to retrieve it and put it back where it belongs holding the key cylinder.
The new one is not a 'geniune' harley switch and I could tell the quality wasn't as good as the original so I decided to put the original back in. If the pin falls out again I will go back to the replacement.
No comments:
Post a Comment